TOLL-FREE: 866-674-3549 • FROM OVERSEAS: +1-520-883-8600

Smoke/CO Alarms

A wide variety of smoke and carbon monoxide detectors for people who are deaf or hearing impaired.
Sort By:  
  • BRK SC7010B Smoke/Carbon Monoxide Photoelectric Alarm with Strobe (SMKCOKIT2)

    The BRK SC7010B is a hard-wired smoke and carbon monoxide combo alarm with battery backup. It features a photoelectronic smoke sensing chamber and electrochemical CO sensor. Applications include residential and institutional applications including hospitals, hotels, motels, dormitories and other multi-family dwellings.

    The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for those with hearing loss to hear the audible horn. This alarm features two latching features and two silence features. The Alarm Latch easily identifies the initiating alarm even after the alarm condition has subsided. The Low Battery Latch identifies which unit is in low battery condition by blinking the green power light. The Low Battery Silence temporarily silences the low battery chirp for up to eight hours. The Alarm Silence silences the alarm for several minutes. The alarm is interconnectable with up to 18 devices, of which 12 can be smoke alarms. This is a hard-wired unit that may require professional installation.

    This package features the SC7010B Smoke/CO Alarm Combo Unit and the SL177 Strobe Light for visual warning. Five year warranty for combo unit. Ten year warranty for strobe.

    Fire Safey Tips (Video)

     
     

    Features:

    • Spread Spectrum Horn Tone makes it easier for those with hearing loss to hear the horn
    • Two latching features: Alarm Latch and Low Battery Latch
    • Two silence features for low battery and nuisance alarm
    • 85dB solid state T3 piezo horn
    • Photoelectric smoke sensor
    • Electrochemical CO sensor
    • Optipath 360 technology: patented technology provides 360 degrees of direct access to smoke sensor
    • Interconnectable with up to 18 devices, of which 12 can be smoke alarms
    • Quick, easy installation
    Add to Cart
    $170.00
  • BRK SC9120B Smoke/Carbon Monoxide Dual Ionization Alarm with Strobe (SMKCOKIT1)

    The BRK SC9120B is a smoke and carbon monoxide combo alarm with battery backup. It features a dual ionization smoke sensing chamber and a carbon monoxide sensor, 85dB horn, 9V battery backup and a "silence" feature. Applications include residential and institutional applications including hospitals, hotels, motels, dormitories and other multi-family dwellings.

    The "Intelligent Sensing Technology" system is designed to reduce nuisance alarms. The "Latching Alarm Indication" remembers which unit initiated an alarm. When interconnected, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or "latch" the information and begin to flash the red LED indicator 2 seconds on, 2 seconds off.

    The "Perfect Mount" system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. This allows fine-tuning to compensate for out of alignment wall studs and to keep the wording level when wall mounting. A single Test/Silent button eliminates confusion. Depending on what mode the alarm is in, pushing the button will test, silence and re-test the alarm when in silence and clear the latching feature. Battery installation and removal can occur while the unit is mounted via the side load battery compartment. This is a hard-wired unit that may require professional installation.

    This package features the SC9120B Smoke/CO Alarm Combo Unit and the SL177 Strobe Light for visual warning. Five year warranty for combo unit. Ten year warranty for strobe.

    Fire Safey Tips (Video)

     
     

    Features:

    • Combination alarm detects smoke and carbon monoxide dangers and eliminates the need for two electrical boxes
    • Dual ionization sensing chamber
    • Latching alarm indicator remembers which unit initiated an alarm
    • 85dB solid state T3 piezo horn
    • Intelligent Sensing Technology reduces nuisance alarms
    • Single button for Test/Silence
    • Two locking features to prevent unauthorized removal of battery or alarm
    • Quick, easy installation
    Add to Cart
    $165.00
  • BRK SL177 Strobe Light (SL177)

    The BRK Model SL177 is a hard-wired strobe light for use with other BRK models including HC9120, HC9120B and HCCO5120BN. It is designed to provide a visual warning of a fire or carbon monoxide danger. Appropriate for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings.

    It features a Smart Strobe that has separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. The flash patterns approximate the audible alarm emitted by either a smoke or heat alarm or a carbon monoxide alarm.

    The 177 candela Xenon strobe flashes an average of 60 times a minute. It features a green LED that signals when it is receiving power. The unit is interconnectable with up to 18 devices, of which 12 can be smoke alarms. Ten year warranty.

    Fire Safey Tips (Video)

     
     

    Features:

    • Smart Strobe has separate flash patterns for smoke and carbon monoxide alarms
    • 177 candela Xenon strobe meets UL 1971 requirements and flashes 60 times a minute
    • Interconnectable with up to 18 devices, of which 12 can be smoke alarms
    • Meets ADA requirements
    • Designed for quick and easy installation
    IMPORTANT:

    You must purchase either the HC-9120, HC-9120B or HC-CO5120BN to use with this product.

    Add to Cart
    $90.00
  • Extra Strobe Receiver (SL177I)

    Extra strobe receivers for the Lifesaver Carbon Monoxide Detector. Five-year warranty.

    • 120V AC3 wire interconnect
    • Bright 177 candela light
    • 1 HZ flash rate (60 flashes per minute)
    • Multi-station capability - up to 24 devices
    • Warning: This visual signaling device has no detection means and must be used in conjunction with operating alarms. Disconnecting or loss of AC power will render this signaling device inoperative.
    Add to Cart
    $108.00
  • Gentex 7109CSC Hardwired Smoke Detector with Ceiling Mount and Battery Backup (7109CSC)

    The 7109CSC photoelectric single/multiple station smoke detector is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 Candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 7109CSC is a ceiling-mount, hardwired unit and may require professional installation. It has battery backup for the audible alarm, not for the strobe.

    Fire Safey Tips (Video)



    Features:

    • 177 Candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • Quick-disconnect wiring harness
    • Form C auxiliary relay contacts for remote annunciation
    • Tandem connection up to 6 detectors per system
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4 inches X 5 1/4 inches X 2 1/2 inches
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.

    Add to Cart
    $149.95
  • Gentex 7109CSW Hardwired Smoke Detector with Wall Mount and Battery Backup (7109CSW)

    The 7109CSW photoelectric single/multiple station smoke detector is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 Candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 7109CSW is a wall-mount, hardwired unit and may require professional installation. It has battery backup for the audible alarm, not for the strobe.

    Fire Safey Tips (Video)



    Features:

    • 177 Candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • Quick-disconnect wiring harness
    • Form C auxiliary relay contacts for remote annunciation
    • Tandem connection up to 6 detectors per system
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4 inches X 5 1/4 inches X 2 1/2 inches
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.

    Add to Cart
    $149.95
  • Gentex 7109LS Portable Smoke Detector - Wall Mount with Battery Backup (7109LS)

    The 7109LS photoelectric single station smoke detector is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 Candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 7109LS is a portable smoke detector - just plug it in. It has battery backup for the audible alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 Candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • 9 VDC battery back-up with audible low battery chirp
    • 9-ft. line cord
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • Relays operate on battery back-up, visual does not operate
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4" X 5 1/4" X 2 1/2"
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.


    Add to Cart
    $169.95
  • Gentex 710CSW Hardwired Smoke Detector with Wall Mount (710CSW)

    The 710CSW photoelectric single/multiple station smoke detector is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 710CSW is a wall-mount, hardwired unit and may require professional installation. Model 7109CSW is available with battery backup.

    Fire Safey Tips (Video)



    Features:

    • 177 Candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • Quick-disconnect wiring harness
    • Form C auxiliary relay contacts for remote annunciation
    • Tandem connection up to 6 detectors per system
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4" X 5 1/4" X 2 1/2"
    • One-year warranty
    PLEASE NOTE:

    THERE IS A 20% RESTOCKING FEE FOR ITEMS RETURNED FOR CREDIT.

    Hardwired models are not returnable once installed.


    Add to Cart
    $129.95
  • Gentex 710LS Portable Smoke Detector with Wall Mount (710LS)

    Worried about not being able to hear your fire alarm? The 710LS photoelectric single station smoke detector is designed to give you a reliable early warning of the presence of smoke where both audible and visual alarms are desirable. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 710LS is a portable smoke detector - just plug it in. Unlike its counterpart the 7109LS, the 710LS does not have battery backup for the audible alarm.

    The 7109LS comes with a one-year warranty from Gentex. Give yourself peace of mind with this ready-to-use smoke detector!

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • 9-ft. line cord
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4" X 5 1/4" X 2 1/2"
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Add to Cart
    $159.95
  • Gentex 7139CSC Hardwired Ceiling Mount T3 Smoke Alarm with Backup (7139CSC)

    The 7139CSC for ceiling mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photo diode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photo diode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

    The 7139CSC provides the temporal 3 (T3) evacuation tone as a standard feature. When testing, it may take up to 16 seconds longer to go in or out of alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (very bright strobe light)
    • Solid state 90dB horn (very loud)
    • Full function test switch (easy for you to test that it is working)
    • Flashes 60 times per minute
    • Meets state, federal, and ADA requirements
    • Mounting hardware for ceiling
    • Temporal 3 (T3) Evacuation sounding device (3 beeps, pause, 3 beeps, pause)
    • Tandem connection up to 6 detectors per system
    • 9V battery backup (audible alarm only)
    • UL Listed (USA)
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.


    Add to Cart
    $149.95
  • Gentex 7139CSW Hardwired Wall Mount T3 Smoke Alarm with Backup (7139CSW)

    The 7139CSW for wall mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photo diode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photo diode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

    The 7139CSW provides the temporal 3 (T3) evacuation tone as a standard feature. When testing, it may take up to 16 seconds longer to go in or out of alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (very bright strobe light)
    • Solid state 90dB horn (very loud)
    • Full function test switch (easy for you to test that it is working)
    • Flashes 60 times per minute
    • Meets state, federal, and ADA requirements
    • Temporal 3 (T3) Evacuation sounding device (3 beeps, pause, 3 beeps, pause)
    • Tandem connection up to 6 detectors per system
    • 9V battery backup (audible alarm only)
    • UL Listed (USA)
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.


    Add to Cart
    $149.95
  • Gentex 7139LS Portable T3 Smoke Alarm - Wall Mount & Battery Backup (7139LS)

    The 713LS for wall mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model plugs into an outlet.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photo diode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photo diode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

    The 7139LS provides the temporal 3 (T3) evacuation tone as a standard feature. When testing, it may take up to 16 seconds longer to go in or out of alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (very bright strobe light)
    • Solid state 90dB horn (very loud)
    • Full function test switch (easy for you to test that it is working)
    • Flashes 60 times per minute
    • Meets state, federal, and ADA requirements
    • Temporal 3 (T3) Evacuation sounding device
    • Tandem connection up to 6 detectors per system
    • Form C Contacts
    • UL Listed (USA)
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.


    Add to Cart
    $169.95
  • Gentex 713CSC Hardwired Ceiling Mount T3 Smoke Alarm (713CSC)

    The 713CSC for ceiling mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photo diode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photo diode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

    The 713CSC provides the temporal 3 (T3) evacuation tone as a standard feature. When testing, it may take up to 16 seconds longer to go in or out of alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (very bright strobe light)
    • Full function test switch (easy for you to test that it is working)
    • Flashes 60 times per minute
    • Mounting hardware for ceiling
    • Meets state, federal, and ADA requirements
    • Temporal 3 (T3) Evacuation sounding device
    • Tandem connection up to 6 detectors per system
    • Form C Contacts
    • UL Listed (USA)
    • One-year warranty

    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Add to Cart
    $129.95
  • Gentex 713CSW Hardwired Wall Mount T3 Smoke Alarm (713CSW)

    The 713CSW for wall mount is a photoelectric single station smoke alarm designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up.

    The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photo diode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photo diode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

    The 713CSW provides the temporal 3 (T3) evacuation tone as a standard feature. When testing, it may take up to 16 seconds longer to go in or out of alarm.

    Fire Safey Tips (Video)



    Features:

    • 177 candela rating (very bright strobe light)
    • Solid state 90dB horn (very loud)
    • Full function test switch (easy for you to test that it is working)
    • Flashes 60 times per minute
    • Meets state, federal, and ADA requirements
    • Temporal 3 (T3) Evacuation sounding device
    • Tandem connection up to 6 detectors per system
    • Form C Contacts
    • UL Listed (USA)
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.


    Add to Cart
    $129.95
  • Gentex 9120F T3 Hard Wired Smoke Alarm with Battery Backup (9120F)

    The 9120F photoelectric smoke alarm is designed for residences and commercial buildings, including homes, apartments, hospitals, hotels and motels. It is engineered to virtually eliminate nuisance alarms and deliver outstanding performance wherever reliable fire protection is required. A 9 VDC alkaline battery is provided for backup in the event building power is lost. Unit is hard-wired in (you will need an electrician to hook it up). One-year warranty.

    Fire Safey Tips (Video)



    Features:

    • 90dB solid state non-latching piezo horn
    • Battery backup
    • Form A/C contacts
    • Patented three position test switch
    • Pulsing LED sensing chamber
    • Tandem connection of up to six units
    • Maintenance indicator
    • Low or missing battery indicator
    • Quick-disconnect wiring harness
    • Mounting hardware adapts to standard junction boxes
    • UL Listed (USA)

    PLEASE NOTE:

    There is a 20% restocking fee for items returned for credit.

    Hardwired models are not returnable once installed.

    Add to Cart
    $59.95
  • Gentex Audible Smoke Detector (7100F)

    A photoelectric type detector which is audible-only but can be used with remote strobes. Unit is hard-wired in (you may need an electrician to hook it up). One-year manufacturer's warranty.

    Fire Safey Tips (Video)



    Features:

    • 90dB solid state non-latching piezo horn
    • Functional test switch—patented three position test
    • Pulsing LED sensing chamber
    • Solid-state LED condition indicator
    • Tandem connection of up to six units
    • Maintenance indicator
    • Quick-disconnect wiring harness
    • Mounting hardware adapts to standard junction boxes
    • UL & ULC Listed
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit.

    Hardwired models are not returnable once installed.

    Add to Cart
    $49.95
  • Gentex Hardwired Smoke Detector with Ceiling Mount (710CSC)

    The 710CSC photoelectric single/multiple station smoke detector is designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It features an audible alarm and a strobe light with "FIRE" lettering.

    Upon activation, the detector will emit a 90dB local audible signal and activate the high intensity strobe. During the alarm period the strobe will flash at a brightness of 177 Candela 60 times per minute. After the smoke has cleared from the detectors, the unit will revert to the normal stand-by condition.

    The 710CSC is a ceiling-mount, hardwired unit and may require professional installation. Model 7109CSC is available with battery backup.

    Fire Safey Tips (Video)



    Features:

    • 177 Candela rating (UL1971)
    • Solid state 90dB horn
    • Nominal 2.5% sensitivity
    • 5-to-1 signal-to-noise ratio
    • Quadra-port smoke entry
    • Full function test switch--patented 3-position test
    • Fully insect screened
    • Quick-disconnect wiring harness
    • Form C auxiliary relay contacts for remote annunciation
    • Tandem connection up to 6 detectors per system
    • Mounting hardware
    • Dry contacts will activate from the tandem wire
    • 7109 series and 710 series are inter-connectable
    • 3100Hz horn frequency (nominal)
    • Compact size - measures 5 1/4" X 5 1/4" X 2 1/2"
    • One-year warranty
    PLEASE NOTE:

    There is a 20% restocking fee on items returned for credit..

    Hardwired models are not returnable once installed.


    Add to Cart
    $129.95
  • Plug-in Combination Explosive Gas & Carbon Monoxide Alarm (GCO1CN)

    This 3-in-1 gas alarm warns against propane, natural/methane, and carbon monoxide. It features an easy-to-read LCD display and an 85dB loud alarm. Simply plug into any standard power outlet (no additional mounting required) and you're ready to go! Includes a line cord, which offers multiple placement options, plus a battery backup in the case of a power outage. Utilizes an electrochemical CO sensor for increased accuracy. Meets UL standards.

    The unit measures 3.1 inches long x 1.8 inches wide x 5.6 inches high (approx. 7.87 cm x 4.57 cm x 14.22 cm). 5-year manufacturer's limited warranty.

    Features:

    • 3-way protection against propane, natural/methane, and carbon monoxide gases
    • Backlit LCD display
    • 120V AC plug-in with battery backup
    • Uses 9V battery
    • Front-access battery compartment
    • End of life timer
    • Test/silence button
    • Low battery indicator
    • Optional horizontal or vertical mounting
    Add to Cart
    $79.95
  • Signature Series Fire Alarm Transmitter (SSFTR)

    This Fire Alarm Transmitter signals a Signature Series Receiver that will flash or vibrate to notify you in the event of a fire or smoke.

    The Signature Series Fire Alarm Transmitter only needs to be wired into a home or building smoke alarm system by supplying 12-24V from the fire panel. It should be installed by a licensed fire alarm company.

    The Signature Series Fire Alarm Transmitter has a range up to 2,000 feet (approx. 610 meters) and carries a 5-year warranty from Silent Call.

    Video Demo

    Use the video selector below to watch Silent Call's informational video or learn some important fire safety tips.

     
    <


    Features

    • Supervision of up to 3 smoke or fire transmitters for malfunction or blocked path of transmitter
    • Range up to 2,000 feet (approx. 610 meters)
    • Requires professional installation

    PLEASE NOTE: This transmitter requires a Signature Series receiver (listed under "Related Products").

    Add to Cart
    $87.95
  • Signature Series Fire Alarm Transmitter with Battery (SSFTRB)

    This Fire Alarm Transmitter with Battery signals a Signature Series receiver that will alert you by flashing strobe light or vibration to notify you in the event of a fire or smoke.

    The Fire Alarm Transmitter with Battery includes 2 AA batteries and should be connected to an existing smoke alarm using a dry contact relay. It should be installed by a licensed fire alarm company.

    The Signature Series Fire Alarm Transmitter with Battery has a range up to 2,000 feet (approx. 610 meters) and carries a 5-year warranty from Silent Call.

    Video Demo

    Use the video selector below to watch Silent Call's informational video or learn some important fire safety tips.

     
    <


    Features

    • Supervision of up to 3 smoke or fire transmitters for low battery, malfunction or blocked path of transmitter
    • Range up to 2,000 feet (approx. 610 meters)
    • Low battery indicator
    • Requires professional installation

    PLEASE NOTE: This transmitter requires a Signature Series receiver (listed under "Related Products").

     

    #SSFTRB Signature Series Fire Alarm Transmitter with Battery

    Add to Cart
    $88.95
Per Page      1 - 20 of 21

Powered by Abantecart eCommerce Solution

Live Help
X

Live Support

We provide support in English,
Spanish, and Portuguese.

<