Hearing

• Replacement AC adapter/power charger for the Stealth SSA Predator Personal Sound Amplifier
• Use with your Stealth SSA Predator or Secret Sound system (not included)
• 6-foot cord; UL listed; For indoor use only
• NOTE: This is an AC adapter ONLY for use in the United States and Canada only

This replacement AC adapter/power charger allows you to keep your Stealth SSA Predator Personal Sound Amplifier all charged up and ready to go!

Use it to replace the adapter/charger that came with your original Stealth SSA Predator or Secret Sound system, or as an extra for another room, vacation home or office. Color: Black. 6-foot cord. UL listed. For indoor use only.

NOTE: This is an AC adapter ONLY for use in the United States and Canada only. Personal sound amplifier must be purchased separately.

Input: 120V AC 60Hz 30mA
Output: 6V DC 100mA

Product Measurements: 2.5 in. x 1.5 in. x 2.0 in.
Product Weight: 6.1 oz.

• Will send a signal to all Clarity Alertmaster Receivers including AL10, AL12 and PXB
• 80 ft. Operating Range
• Has an adjustable sensitivity setting
• Operates on a 9-volt battery (included)
• Covered under a 1-year mfg. warranty

Place this baby monitor near your baby, and it will let you know when you baby cries. Place the baby monitor in your child's room or next to them anywhere in your home. This baby device works up to 80 feet away from base unit. Once triggered, it will send a wireless signal to a receiver to alert you. Operates on a 9-Volt Battery (included). Covered under a 1-year manufacturer warranty.

• 10x30-in Sensor Pad under patient signals Monitor of movement
• Blinking light and adjustable-volume audio alerts
• Safety Auto-Reset: automatically resets alarm after activation
• Monitor uses 3-AA (not incl.) or optional AC adapter
• SafeTRelease Cord separates instead of breaking

This combination set from Smart Caregiver consists of one FallGuard Safety Auto-Reset Monitor (TL-2100S) and one Silver Lining Bed Sensor Pad 10-in. x 30-in. (PPB-RI). Used together, they provide a reliable means for caregivers to be alerted if a patient gets out of bed or gets up from a chair.

ABOUT THE MONITOR COMPONENT:
Automatically resets after pressure is applied to a connected sensor pad!

The FallGuard Safety Auto-Reset Monitor is a fall prevention monitor that can be placed at the bedside or wheelchair, connected to a corded sensor pad. When the resident gets up and pressure is removed from the pad, the monitor will sound alerting the caregiver. If the pressure is re-applied to the pad, the monitor will automatically reset.

The TL-2100S FallGuard Safety Auto-Reset Fall Monitor alarm works with Smart Caregiver standard bed sensor pads, chair sensor pads, floor mat sensors, and early warning seat belts.

ABOUT THE CHAIR SENSOR PAD COMPONENT:
No more broken cords! This Bed Alarm Sensor Pad has a replaceable SafeTRelease that separates instead of breaking or pulling cord away from pad, providing greater safety with less tripping risk and reducing the need to buy new sensor pads due to cord damage.

Bed Alarm Sensor Pads by Smart Caregiver are placed under the resident on the bed. When resident gets up and pressure is released from the pad the monitor will be activated and alert the caregiver (Monitor required, not included).

The PPB-RI Bed Alarm Sensor Pad offers caregivers an efficient method of knowing when a resident is getting out of a bed. Bed Alarm Sensor Pads from Smart Caregiver are compatible with all Smart Caregiver fall prevention monitors and systems.

These Bed sensor pads are totally sealed and impervious to fluids. They are made with silver membrane technology to assure a long reliable life. These weight-sensitive pressure pads are for bed fall alarm monitor use. When connected to a fall prevention monitor, the pressure pad will trigger the fall alarm when weight is removed from the pressure pad itself. This pressure pad provides incontinence protection.

IMPORTANT NOTE: Non-Returnable. For health and sanitary reasons, we cannot accept returns on this item.

MONITOR FEATURES & SPECIFICATIONS:
- Safety Auto-Reset function automatically silences and resets alarm
- Optional Setting: Caregiver with key can reset monitor with Patented, Caregiver Key that Tamper-proofs the monitor
- No Unsafe Off switch - prevents resident tampering
- Raised Visual Status light enabling caregiver to see alarm from a distance
- Patented Pad Lost notification - alerts caregiver if connection between sensor pad and monitor becomes disconnected
- Battery operated (3 AA batteries not included) or optional AC adapter
- Low Battery notification - Light will flash to alert caregivers that the batteries are becoming low in the fall monitor
- Nurse call capability - a nurse call adapter allows for use with a hardwired nurse call system, alerting caregivers through an existing nurse call system
- Adjustable volume - features full range volume control
- Cord protection - wraps through protective boot, reducing damage to sensor pad
- Multiple alarm tones
- Protective Boot
- 1 Year Manufacturer's Limited Warranty

BED SENSOR PAD FEATURES & SPECIFICATIONS:
- Unique, SafeTRelease Cord separates instead of breaking or pulling cord away from pad
- No more replacing sensor pads due to broken cords (cords can be replaced if broken)
- Great safety feature: Reduces tripping, entanglement and choking hazards
- SafetyTRelease cord guaranteed for life of pad
- Measures 10-in x 30-in
- One pad
- 1 Year Manufacturer's Limited Warranty

• Sensor Pad under patient signals Monitor of movement
• Blinking light and adjustable-volume audio alerts
• Safety Auto-Reset: automatically resets alarm after activation
• Monitor uses 3-AA (not incl.) or optional AC adapter
• Chair Sensor Pad measures 10-in. x 15-in.

This combination set from Smart Caregiver consists of one FallGuard Safety Auto-Reset Monitor (TL-2100S) and one Silver Lining Chair Sensor Pad 10-in. x 15-in. , Coiled Cord (PPC-WI). Used together, they provide a reliable means for caregivers to be alerted if a patient gets out of bed or gets up from a chair.

ABOUT THE MONITOR COMPONENT:
Automatically resets after pressure is applied to a connected sensor pad!

The FallGuard Safety Auto-Reset Monitor is a fall prevention monitor that can be placed at the bedside or wheelchair, connected to a corded sensor pad. When the resident gets up and pressure is removed from the pad, the monitor will sound alerting the caregiver. If the pressure is re-applied to the pad, the monitor will automatically reset.

The TL-2100S FallGuard Safety Auto-Reset Fall Monitor alarm works with Smart Caregiver standard bed sensor pads, chair sensor pads, floor mat sensors, and early warning seat belts.

ABOUT THE CHAIR SENSOR PAD COMPONENT:
Chair Sensor Pad Alarms alert a caregiver whenever pressure is removed from the sensor pad. When the resident is getting up, the pressure of the pad is removed and the alarm on the fall monitor will sound.

The PPC-WI Sensor Pad by Smart Caregiver has set-up instructions printed right on the pad. There is also a spot for recording the initial date of use. Bed and Chair Pads are easy to clean.

IMPORTANT NOTE: Non-Returnable. For health and sanitary reasons, we cannot accept returns on this item.

MONITOR FEATURES & SPECIFICATIONS:
- Safety Auto-Reset function automatically silences and resets alarm
- Optional Setting: Caregiver with key can reset monitor with Patented, Caregiver Key that Tamper-proofs the monitor
- No Unsafe Off switch - prevents resident tampering
- Raised Visual Status light enabling caregiver to see alarm from a distance
- Patented Pad Lost notification - alerts caregiver if connection between sensor pad and monitor becomes disconnected
- Battery operated (3 AA batteries not included) or optional AC adapter
- Low Battery notification - Light will flash to alert caregivers that the batteries are becoming low in the fall monitor
- Nurse call capability - a nurse call adapter allows for use with a hardwired nurse call system, alerting caregivers through an existing nurse call system
- Adjustable volume - features full range volume control
- Cord protection - wraps through protective boot, reducing damage to sensor pad
- Multiple alarm tones
- Protective Boot
- 1 Year Manufacturer's Limited Warranty

BED SENSOR PAD FEATURES & SPECIFICATIONS:
- Sensor Pad is placed under patient in bed
- Monitor (not incl.) activates if patient gets up
- Pad measures 10 x 15-in
- One pad
- 1 Year Manufacturer's Limited Warranty

The Beginning Sign Language Series is a fascinating and enjoyable way for beginning signers to learn sign language. The Can I Help You? book presents signs, sentences, and information to help a beginning signer communicate with a hearing impaired person.

• Alerts to land & cell calls, texts and more
• Cell Phone Ringer/Flasher
• Wireless Doorbell
• Wireless Vibrating Personal Receiver/Pager
• Bed Shaker

Everything you need to get alerted to incoming landline, cell phone, Skype and FaceTime calls and text messages, as well as wireless doorbell rings. Alert notifications for those with hearing impairment are through the receiver pager and include a bed shaker for nighttime alerts. One year manufacturer's limited warranty. ABOUT THE COMPONENTS: 1. CentralAlert Cell Phone Ringer/Flasher (Model CA-CX) The CA-CX uses a loud ringer and bright flasher to alert you to incoming landline, cell phone, Skype and FaceTime calls and text (SMS) messages. And with a bed shaker connected, you will never miss a call again, even while you sleep.

• CentralAlert Cell Phone Ringer/Flasher
• Wireless Doorbell
• Alerts to incoming phone calls and texts
• Also alerts to Skype and FaceTime calls
• Loud ringer and bright flasher alerts

This alerting system for the hardof hearing is everything you need to get alerts of incoming landline, cell phone, Skype and FaceTime calls and text messages, as well as wireless doorbell rings. One year manufacturer's limited warranty. ABOUT THE COMPONENTS: 1. CentralAlert Cell Phone Ringer/Flasher (Model CA-CX) The CA-CX alerting system uses a loud ringer and bright flasher to alert you to incoming landline, cell phone, Skype and FaceTime calls and text (SMS) messages. And with a bed shaker connected, you will never miss a call again, even while you sleep.

• Exceptional sound quality and filtering; including 64 gain positions and all of the stethoscope controls on the head
• Remembers the last volume setting when restarted
• 2 minute off timer - shuts off after 2 minutes of non-use to conserve battery life
• Uses an off-the-shelf AAA battery (not a hard-to-find watch battery)
• 1-Year Manufacturer Limited Warranty and lifetime technical support

The Clinical Model E-Scope II will amplify up to 116dB SPL (sound pressure level). It has a sound output jack that can be used with an optional headphone accessory - item 7180405 - External Headphones for a second listener (Clinical Model)(Note: You must request a square plug to use external headphones for 2nd listener) or Replacement for the Hearing Impaired Belt Model. An optional stethophone may be used as well for a second listener item 718741.

Sounds are up to 30 times that of acoustic stethoscopes (non-electronic, non-amplified units). Easy to use; Controls: volume up, volume down, selector switch for heart and lung sounds. 2-minute timer for battery conservation. Accessory pack included-(consists of 1 Pediatric Diaphragm, 3 plastic bells (adult, pediatric, infant) and 2 additional hard plastic mushroom style ear tips). Stethoscopes now include a stainless steel adult specialist diaphragm which improves the quality of sound by 60-percent

Includes carrying case, operators manual and instructional CD-Rom and 1 AAA Battery. 1 year mfr warranty on parts and labor.

• Use with any E-Scope Electronic Stethoscope
• Wear over the head or behind the head
• Folds up for easy carrying

The Convertible Style Headphones for E-Scope was designed to be worn over the head or behind the head (thus, the name 'convertible'). Folds up for easy carrying. For use with any model E-Scope Electronic Stethoscope.

• No cords - Reduces tripping hazards & tangles
• Works w/wireless CordLess fall monitors (not incl.)
• Measures 10-in x 30-in

Bed Alarm Sensor Pads offer caregivers an efficient method of knowing when a resident is getting out of a bed. Bed Alarm Sensor Pads from Smart Caregiver are compatible with all Smart Caregiver fall prevention monitors and systems.

When using a GBT-RI Wireless CordLess Bed Alarm Sensor Pad with a Wireless CordLess Monitor you are able to remove the alarm noise from the room creating a quiet in-room environment for the resident. Pad is placed under resident on the bed. When resident gets up from pad, a wireless signal is sent to the monitor setting off an alarm to alert caregiver.

These Bed sensor pads are totally sealed and impervious to fluids. They are made with silver membrane technology to assure a long, reliable life. These weight-sensitive pressure pads are for bed fall alarm monitor use. When connected to a fall prevention monitor, the pressure pad will trigger the fall alarm when weight is removed from the pressure pad itself. This pressure pad provides incontinence protection.

IMPORTANT NOTE: Non-Returnable. For health and sanitary reasons, we cannot accept returns on this item.

FEATURES & SPECIFICATIONS:
- No cords - Reduces tripping hazards an eliminates broken or tangled cords
- Only for use with TL-2100G FallGuard Cordless Monitor (item 903940)
- Measures 10-in x 30-in
- One pad
- 1 Year Manufacturer's Limited Warranty